At some point, all residences and businesses will have to struggle with loose doorknobs or handles. It’s only a matter of time before the handle pulls away from the door or jiggles when trying to open it, annoying your employees or customers.
On commonly used doors in the home, loose doorknobs are a common problem. However, the doorknob or lever can loosen and spin on its spindle at times. Everyone known about how to fix door knob properly. Actually, the mounting ring and faceplate of the lockset become loose and slide away from the door’s surface. The design of your doorknob or lever and how it is secure to the spindle and the door will determine how you resolve the situation. However, to install new door locks in your home, call Lock Installation in Norridge.
Tools used For Fixing A Doorknob
To tighten a loose doorknob, you’ll need the following tools:
- Screwdriver with a Phillips’s head
- Screwdriver with a little flathead
- Allen screwdriver
- a little flashlight
How To Fix A Door Knob Step-By-Step Guide:
The style of the handle and how the lock system is attached to the door will determine how you fix a doorknob. The majority of door lock systems have visible screws that are simple to remove. At the same time, others have hidden or recessed fasteners that you can only access by disassembling the doorknob and faceplate.
Step 1: Examine the way the knob is attached to the door
The following are the most popular doorknob configurations:
- Most doors have visible screws on the faceplate of the knobs.
- Spring-loaded with unseen screws: The screws are hidden below the faceplate on these sorts of doors. A spring-loaded button called a detent secures the knob to the spindle.
- However, the screws are similarly covered below the faceplate in this case, and the knob is attached to the lock system with a hexagonal-shaped setscrew.
- Knobs from Kwikset are less prevalent. To reveal the long screw that travels through the spindle, remove the doorknob and fix a door knob properly.
Use the below code to embed this infographic
Step 2: Tighten Screws That Have Been Exposed
If you have a traditional door lock system with visible screws, all you have to do to remedy a wobbling knob is tighten the screws.
However, Locate the screws on the interior knob’s faceplate. Then fasten the loose screws clockwise with a Philips-head screwdriver (or a tool compatible with the screws on the faceplate)
Step 3: Use a hidden hexagonal set screw to tighten the knob
After removing the knob, tighten the hexagonal setscrew or concealed screws on the backplate to fix this type of knob.
- Locate a small round hole on the inner knob’s shaft, normally on the bottom.
- Tighten the setscrew with an Allen wrench to see if it fixes the problem. If not, you’ll have to remove the knob to reveal the screws that hold the lockset assembly together in the backplate.
- Insert an Allen wrench into the small round hole to unscrew the knob. To remove the set screw, turn the wrench counterclockwise. The knob should now be free.
- Tighten any loose screws using a screwdriver. Replace the rose, put the knob back onto the spindle, and tighten the hex-screw into its hole to secure it in place.
Step 4: Using Hidden Screws, Repair A Spring-Loaded Knob
A detent is a spring-loaded clip found on several lock systems. This clip, like the setscrew, maintains the knob firmly attached to the spindle. However, To repair this lock, you must first remove the knob to have access to the loose screws on the backplate.
- Find a little slot along the internal knob’s shaft. Put a paperclip, strong wire, or small flathead screwdriver through the hole and press momentarily to spring the knob while holding it.
- Although, remove the knob from the spindle by prying it out. Remove the rose collar to reveal the backplate and screws that secure the lockset to the door. If these fasteners are loose, the doorknob may be loose as well.That’s why you fix a door knob problem properly.
- Tighten the loose screws with a screwdriver. Then, to secure it in place, replace the rose collar and turn it clockwise.
Step 5: Repair a Kwikset Door Knob That Is Loose
Kwikset lock systems were previously fairly popular, but they’ve fallen out of favour and are no longer found in many residences.
Suppose you have this type of lock system (look for the ‘Kwikset’ brand name on the latch plate around the edge of the door). You are not the only one having trouble disassembling it to tighten the loose mounting screws.
Unlike other locks, which use small screws to hold everything together, Kwikset uses large screws that go through the spindle that links the outside and interior knobs. However, The handles may wobble due to loose screws.
Step 6: Take apart the Kwikset doorknob
You’ll need to access the lengthy screws in the spindle to fix a loose Kwikset knob. However, you must first remove the knob.
- Hold it and twist it slightly to disconnect the rose from the door. Will reveal a backplate that holds the entire lock assembly together.
- Look for a tiny slot on the side where the backplate meets the door.
- Slide the arrow upward with a small flathead screwdriver. Hence, to avoid damaging the lockset, use as little force as possible. You should release the knob, and the backplate should be visible after sliding the arrow upward.
- Slide the knob off the spindle to reveal the long screws that link the interior and exterior doorknobs and pass through the spindle.
- To fix the rattling lockset assembly, use a screwdriver to adjust the long screws.
- To lock the doorknob into the wheel, replace it and twist it to the left. However, You’ll see the small arrow you pressed up before coming down. After that, twist the rose once more to secure the complete knob assembly.
Conclusion
Various factors might cause a doorknob that refuses to turn. They may rust from within if they have been idle for several months or weeks. They want to turn and need to be fixed when this happens. When the key of your old door locks is stuck, call Rekey lock-in Hillside to solve this type of issue.