It’s possible that you misplaced the key on your way home. It’s possible that you arrived home ahead of the rest of the family in order to surprise them, only to discover that they are out of town.Whatever the case may be, this article will show you everything you need to know about opening a locked door with a knife.
How to Use a Knife to Pick a Lock
Jab, Twist, and Wiggle (method 1)
You don’t have a tension wrench or a lock pick with you.
The concept behind this method is to have the knife perform both the tension wrench and the lock pick functions at the same time. That won’t be easy, but with some improvisation, we should be able to pull it off. Contact Lockout service in Oak Park for professional aid.
Step 1:
Firstly, insert the knife blade into the keyhole until the tip of the blade catches on the back of the lock.
Step 2:
Secondly, turn the knife slightly (typically to the right) as if you were trying to open a locked door with a knife. When done correctly, this step puts pressure on the lock pins (much to the tension wrench), allowing you to elevate the pins and unlock the door later.
Step 3:
Thirdly, with the knife blade safely inside the lock, wiggle it up and down to loosen the pins and unlock the door. Return the knife to the beginning position (before step 2) to re-align the pins if you haven’t documented success yet. Replace the knife and repeat the operation.
However, if you don’t get it perfect the first time, changing the applied pressure is crucial. However, keep in mind that you only need a little pressure to make this work, so don’t get too worked up.
For Push-Button Locks, Method #3
So far, the other methods have explained how to pick a lock with a keyhole. When it comes to push-button locks, however, this is not the case.
You, too, are not without assistance. Follow these steps:
Step 1:
Firstly, place the knife blade between the door and the frame in step one.
Begin at the top and work your way down until you reach a point of resistance, which is where the door latches into the locking port.
Step 2:
Secondly, inside the door frame, wiggle and twist the knife (a larger knife is preferred). The goal here is to unbolt the door.
Step 3:
Thirdly, apply pressure to the door lock to pull it away from the slot. The door should open with patience and time.
However, people say you can do it with a credit card as well. A credit card may or may not work, depending on the strength of the door lock, and may be broken.
For spring-loaded locks, use Method #4.
The tension wrench and the other lock picking equipment that come with it are employed for this type of lock for a reason.
They’re simply too delicate to react to larger knives, and even smaller knives will struggle with them.
To succeed here, you’ll need a knife that’s been filed down to the tiniest size possible. That does not appear to be something you would keep on hand.
Fortunately, you may try certain pieces with a Swiss Army Knife (I like this one on Amazon) to get this working:
Step 1:
Insert a very thin knife (or a similar tool from a Swiss army knife) into the doorway.
Step 2:
Wiggle the narrow lock pick while twisting/turning it.
Step 3:
Pay attention to a click, which indicates that you are on the proper track.
STEP 4:
Be patient and the locked door will open.
Method #5 – Knife and Other Equipment
Put Knife-in-Key-hole
Put the knife in just far enough to allow another substance to pass over it.
When you’re not even inside the house, how are you meant to get other tools?
Don’t be concerned. I only discuss tools that you should be able to find on your person. We should be able to make this work, from the bobby pins in your hair to the paper clip in your suitcase.
Step 1:
If you don’t have a tension wrench, insert a small knife into the keyhole as illustrated above. If you have a Swiss army knife, you can use various small tools in addition to the knife.
Step 2:
Apply a rotational force to the knife with only a gentle touch. This engages the lock mechanism in the same way as twisting a key does to notify the door lock that it is going to be opened.
Step 3:
Add another item to the mix to serve as the pick. This could be a bobby pin, a paperclip, a strong wire, a little metal strip, or something else entirely. The chosen material must be firm, thin, and long enough to reach the door lock’s end.
Step 4 :
slowly lift the chosen lockpick so that it also raises the pins in the lock.
Step 5 :
Quickly remove the pick out of the lock after contact with the pins has been established. This causes the pick to drag the pins out as well.
Step 6 :
With luck and ability, the pins will be slid up into the door lock, disengaging the locked door. If not, you may have to repeat this procedure several times.
Take care not to injure your hands when dealing with this model. You might simply touch the knife’s edge with the fast-jerking movement to bring the bobby pin/paperclip/other metal stuff out while maintaining the knife tensioned below. You may also search for Residential locksmith in Elmwood park for help.
Should you use a knife to pick a lock?
Yes, you can pick a lock with a knife if there are no other options.
However, if you do have options, it is best to examine what they have in store for you first. Moreover, If you frequently misplace your keys, consider leaving a spare with someone you can trust. However, you can also consider purchasing a lock pick set just for fun. If necessary, make sure you can explain this to law enforcement officers.
Conclusion:
Maybe you watched it in a movie or saw it done directly in front of your eyes. Whatever the case may be, knowing how to pick a lock with a knife is a useful ability to have. You may never require it, but it is preferable to require it and not own it. Start practicing today – or master any of these techniques for when you’re in a tight situation with only a knife and a locked door in front of you.