Speaking of today’s world, cars have become the need of every person. Firstly, every household needs a vehicle for functional reasons. Secondly, Cars help us to run errands effectively. In addition to this, cars give us the comfort of private conveyance In this article, we will guide you about car door lock repair. Furthermore, we will also teach you how to take care of your door locks.
Having a car means that you have to take great care of the vehicle and its accessories. Furthermore, Car door locks need keys to get unlocked. Car door locks can either get jam, or the actuators may fail. Either way, car door locks are useless.
Firstly, we will see how to open your jammed doors.
Why Car Door Locks Get Jammed:
Car doors can be stuck in their place. It makes it impossible for a door lock to open. Before we see how to unjam door locks, let us guide you about the causes which jam the door lock. By avoiding these causes, you can skip the tiring process of unjamming the door of your car.
Following are some reasons for a jammed door:
Faulty FOB key:
If you use the key FOB to open your car door, it might contribute to the jamming of your door. Broken FOB keys do not give signals correctly to the door, which results in door jamming.
Faulty Connections Within Door System:
A door has an in-built system in its door. Any broken connection in the door latch, door handle, lock bolt, or internal locking switch can result in door jamming. Furthermore, permanent damage can replace the whole system and even the door wholly.
Debris In The Car Door Lock:
Dust and debris can get accumulated in the car door lock over time. If we do not clean our door lock frequently, this debris can cause the door to jam. On the other hand, if you use the FOB key, it will not happen to you.
Configuration Flaw:
Any configuration flaw or structural damage can lock the door in its place. Hard blows or slamming of the door can frequently damage the car’s configuration. It may be one of the reasons for a jammed door.
How To Open Jammed Car Doors In 2 Easiest Ways:
You can use the following method to unjam your car. However, if you cannot unlock your car door, you would want to contact car locksmiths. Maybe the door of your key needs some programming or replacement. You can get the car key program in Melrose Park.
Use Lubricating Agent:
Tools Needed:
- A WD-40 lubricating spray
- Flathead screwdriver
Procedure:
- Take out your lubricant spray. You can use WD-40. It is a penetrative catalyst suitable for clearing any junk material from the lock. Moreover, this spray protects the lock from rust and corrosion in the future.
- Now place your Screwdriver at the screw. This screw will be present next to the key. Make sure you have taken out your key from the keyhole. Poke your Screwdriver in this metal piece and apply pressure. Keep on pushing the ScrewdriverScrewdriver until it moves backward to spare some space.
- Now spray a generous amount of the lubricant on it. And make sure it goes inside the screw.
- Now put your car key in the keyhole and rotate it in order to open the door. But before doing that, move your key back and forth to move the junk in the keyhole. As the waste is softened now, it will come out at once. Now, rotate the key to open your car door.
- If the door does not open, repeat the procedure until you have removed all the debris from the lock.
Unjam The Whole Internal System:
Tools Needed:
- Philips head Screwdriver
- Needle-nose Pliers
- Lubricant spray
Procedure:
Remove The External Plates Of The Door:
Take out your Philip’s head ScrewdriverScrewdriver and use these to remove the door handle. Most of the doors have removable internal plates. Now, Remove all the nuts and screws from the inner plate and take it out.
On the other hand, if your car has an insulation sheet on the internal plate, then remove it first. Importantly, these sticky insulation sheets act as a safety layer on the inner plates. After you have repaired the system of your car, put the sheet back in place.
If you are finding any difficulty removing internal plates or sheets, you may contact any professional locksmith. For this purpose, you can search for a car locksmith near me.
Use the below code to embed this infographic
Search For a Metal Plate:
After removing the internal plates, search for the door lock mechanism. If you cannot find the door lock mechanism, use a flashlight. It will be a metal plate. Moreover, this metal plate will be attached to a rod present under the door.
Move The Metal Rod:
Moving forward, use needle-nose pliers to grasp the metal rod. This metal rod will be attached to the side of the metal plate. The metal rod is the kind of shaft that moves the lock.
Spray The Lubricant:
Move this rod in an upward and downward direction. It will help you to unlock the door. As this lever locks and opens the door, moving it will do something, at least. Keep moving it until you see the door lock locking and unlocking steadily.
Alternatively, if you find any difficulty moving the rod, use any lubricant spray. You can use WD-40 to soften and remove the junk.
Do The Trial:
Lastly, put your key in the keyhole. Please lock and unlock the door a few times to check the door’s working.
If you use key FOB or electronic key, then make sure to test it as well.
Conclusion:
It is to be concluded that cars are very important in our lives. But we need to take care of them. Firstly, we should clean keyholes more often. Secondly, we should repair the faults on time. We should never procrastinate when it comes to cars.